英语翻译

题目

英语翻译
attached to the tension sensor and another end is fixed on the
eyelet.The yarn segment between the guide-eye and eyelet
forms a ballooning curve while the eyelet is rotating and this
segment is defined as the yarn-length in the balloon.The
yarn-length in the balloon increases while the arm,on which
the tension sensor is fixed,moves downward (Figure 2).When
the arm goes to the lower limit,the yarn-length between
guide-eye and eyelet reaches the “maximum” value.The
yarn-length in balloon decreases while the arm moves upward
until it reaches the upper limit.The arm speed is set at 200
mm/min.When the eyelet starts rotating,the yarn segment
between the guide-eye and rotating eyelet will form a
ballooning curve and generate tension in the ballooning
yarn.The tension signal at the guide-eye is digitised by the
computer data acquisition system.
Materials
We have used three different types of yarns with various
counts

答案

张力传感器连接到另一端上,并固定鸡眼.之间的指南,眼睛和网眼纱段形成了一个气球曲线,而小孔,这是旋转部分被定义为纱线长度在气球.该纱线长度在气球上升,而手臂,上张力传感器是固定的,向下移动（图2）.何时手臂去下...