哪位专业人士帮我翻译下.谢谢

题目

哪位专业人士帮我翻译下.谢谢
9. Displacement according to mold splitting is no more than 1 mm.
10. Feeding devices’ remains are acceptable no more than 2,5 mm.
11.Casting material according to the mold splitting no more than 1mm is acceptable.
12. Rough edges on core connections and going off the casting is acceptable no more than 1mm.
13. On nonworkpiece surfaces of casting blowholes and other defects are acceptaple up to 3mm, depth up to 2mm in amount up to 4 units on the surface if they don’t go to edges. On the inner surface blowholes are not acceptable.
14. On the workpiece surfaces different casting defects are acceptable up to 2/3 of the machining allowance.
15. On the finished surfaces blowholes, gas fines are not acceptable.
16. On thread surfaces blowholes which don’t go to the edge of the thread and destroy the thread no more than 2 lines are acceptable.
17. Not painting in hard-to-reach inner surfaces up to 8 cm2 max is acceptable.
18. Spray

答案

你连什么方面都没告诉别人,别人不好下手的啊~感觉像机器类或者五金类的东西的制作要求