英语翻译

题目

英语翻译
sensor installation instructions
NOTE:Sensor 12-00385-01sv has a self contained positioning sleeve,this sleeve will act as a "stop",which reduces movement of the sensor within the conduit when pulled at the sensor wires.(see Figure C) This sensor configuration may also be used for return air operation.A replacement cushion clamp is provided if this sensor,is to be used as a return probe.
To properly position the unit supply sensors,the sensor sheath must be fully inserted through the small hole at base of the conduit.This positioning will give the sensor the optimum amount of the exposure to the supply air and will allow the control due to the lack of air flow over the sensor and the subsequent detection of air temperature within the conduit.
It is also necessary to ensure that the probe tip does not contact the evaporator backpanel.A minimum clearance of 0.25 inches(6mm) .should be maintained.
Replacing Temperature Sensor
1.turn unit power off and disconne

答案

传感器安装说明 注意：传感器12 - 00385 - 01sv有一个自给自足的定位套,这个套将作为一个“一站式”,从而降低了内部的传感器时,在拉电线导管传感器的运动.（见图三）这传感器配置可能也可用于来回操作.阿更换垫钳是...